MQTT Firmware Image Upgrade

This firmware image can be applied to any Presence Z1 to report over MQTT/WiFi instead of Zigbee. To apply it, follow the Firmware Update Procedure in the user manual.

After applying the update, the unit will boot up and go straight into DFU mode. Connect to the sensor’s wifi network and enter your WiFi credentials and MQTT Broker IP address, as well as a custom MQTT reporting path if desired. Reboot the sensor to apply the settings. The light will stay off if the sensor successfully connects to WiFi and the MQTT broker, and will display the pairing light code (slow pulsing) if it fails to connect to WiFi or the MQTT broker. This MQTT implementation implements Homeassistant-style autodiscovery. Like the standard firmware image, the reset button can be pressed 5x times to enter DFU mode for advanced configuration or to change network settings.

Previous
Previous

Presence Z1 Advanced Configuration Guide

Next
Next

v0.29.19 Presence Z1 Firmware Upgrade